In Wall Fireplace - How to Choose the Right Height and Depth for Your Fireplace

A built-in fireplace gives an elegant, polished look without having to pay for an additional mantle. It is one of the easiest electric fireplaces.

There are many aspects to take into consideration prior to purchasing your in-wall fireplace. To get the most value from your investment, consider these helpful tips:.

Height

Although it might seem like something that is easy but determining the height of your fireplace is among the most crucial decisions you can make. The size of your fireplace’s height can affect everything from how it fits into a room to its visibility. The fireplace may appear odd in the event that it is set too high. It could also diminish its aesthetics. On the other side, having your fireplace too low can cause it to be lost in the wall space.

Electric fireplaces can be erected at various levels. The majority of people place their fireplaces in a seated position at eye level. This typically requires a height of between 40 and 42 inches from the floor to the bottom of the fireplace. Some people place their fireplaces under their TVs. This can be an attractive alternative.

The height of your fireplace is contingent on several factors that include the length and size of the wall you want to put it on. The bigger the room, the larger it can be. This could mean you are capable of fitting a larger fireplace in it. The same goes for the length of the wall, since a longer wall can support a wider fireplace.

Another important factor to consider is how you plan to make use of your fireplace. If you plan to use it for decorative purposes, a shorter level will work better. If you intend to use it to heat your home it is necessary to ensure that the fireplace is strong and tall enough to withstand the safety standards.

It is important to choose the proper height for your fireplace, so that it will match your decor and be easy to clean or fill. You can always ask a professional fireplace installer to assist you if aren’t sure what height you should choose. They can suggest the best height for your fireplace according to their experience and the design of your home’s design.

Depth

It is crucial to know the depth of a fireplace if you intend to put it in a recessed position. If you’re planning to cut your wall, ensure that you have enough depth to accommodate the interior design of your fireplace (the smoke shelf that is above the fireplace box, the flue which rises through the roof, and the fireplace itself). Also, think about the space you will have for the surround and whether or not you’d like a mantle.

Many of the latest electric models of fireplaces have a depth that is nearly concealed, creating a “built-in” look. The Panorama Bi-Deep series is a fantastic example of this kind of wall-mounted electric fireplace. This model has a 5.8-inch deep that allows viewers to see the flames, ember bed, and not the frame. The media package includes driftwood logs in natural appearance white pebbles, as well as crystals of clear glass to increase the embers’ glow and reflect the flames.

Gas wall-mounted fireplaces also come in both shallow and deep models. When determining the depth of your fireplace it is crucial to keep in mind that these fireplaces are supplementary heat sources and should be properly vented by a trained professional. When determining the size of a gas fireplace you must take into consideration the length of the vent pipe and the size of the chimney.

It is important to read and follow the instructions of the manufacturer before installing your fireplace. In the majority of instances, a professional installation is highly recommended. Also, it is always recommended to have an additional person on hand when installing gas fireplaces.

The addition of an in-wall fireplace place to your home is a great option to enhance it and add an atmosphere. It can also lower your heating expenses. It’s an excellent alternative when you aren’t able to fit an old-fashioned fireplace into your home due to space restrictions or www.fireplacesandstoves.uk because of the location of a chimney.

Surface Mount

Surface mounts are a great alternative if you don’t want to or aren’t able cut into the wall to install an electric fireplace. They also give it a sleek built-in look. Certain models, such as the Allusion line, can even be installed partially recessed into the wall without compromising the heat output or aesthetics.

To start the installation process, you must determine where you want your fireplace to be installed and make a mark using a pencil on the wall where the bracket will be erected. Use a stud-finder to locate the studs and then place each bracket in front of at least one stud for stability. If a stud isn’t in reach or doesn’t work for your fireplace, use anchors for the drywall to support the mounting bracket.

Once you’ve marked the location of the brackets for mounting and drilled them, screw them into the wall making sure they are aligned with the studs. You can use studs or plastic anchors to connect each bracket. After the mounting brackets have been installed then lift the fireplace up and hang it from the bracket. Once it’s secure, check the position of your fireplace to ensure that it’s straight and not crooked within the opening.

Before you begin the installation, plug your fireplace in and make sure that all the features are working properly. Start the fire, play around with the flames, the heat, lights for the ember bed and the list goes on. Once you’re happy with the results you can now install your floating mantel.

Depending on your fireplace’s model You’ll either have to connect the wire connection to the appliance connector on the mantel’s bottom, or if it has slots or hooks, connect them to slots on the mounting brackets. After you’ve completed this process, consult your fireplace’s user manual for instructions on how to remove the glass front panel from the opening and replace it.

If you need to adjust the height you can replace the glass front after you have removed the front panel. If your fireplace has ember bed media spread it over the top grate to give it a more natural look. Secure it using the screws that come with it.

Plug-In

In contrast to traditional fireplaces that burn wood, electric fireplaces don’t require vents or chimneys. They plug into standard outlets they can provide additional heat to rooms up 400 square feet. You can also customize the ambiance with multiple flame and heat settings. Some models have LED lighting effects to highlight the fire and embers. Some models have a top grille grate that conceals manual controls but pops open to reveal pushbuttons to select the setting you prefer.

Electric fireplaces with plug-ins can be mounted directly on walls or installed into the wall for a built-in appearance. These units are typically simpler to install than a mantel fireplace. Some models include a pedestal to allow you to put the fireplace on flat surfaces, such as a dresser or buffet. A remote control along with mounting hardware and a log set are included. Depending on the model, these electric fireplaces may include both heat and flame options that can be turned off for all-year-round comfort.

Some models feature privacy glass that can be easily adjusted from fully transparent to partially transparent. This makes these models popular for walls that divide common entertainment spaces like dining and living areas. They can be even used in bedrooms where the addition of a fireplace is an affordable way to cool an area without compromising privacy.

Although plug-in electric fireplaces don’t need to be hardwired like traditional fireplaces, they must be mounted within the wall that is at least not stud-free and is able to support the weight of the fireplace. Some models come with a kit that comes with a pre-wired cord as well as a special bracket that makes the installation process simpler. This kit can be used for either the installation of drywall or concrete.

When choosing a location for your wall mount electric fireplace, ensure it’s near an electrical outlet. Depending on the model that you choose, plug-in electric fireplaces may be connected to outlets that are on the same circuit or a separate circuit for your electric fireplace. It is suggested to use a separate circuit to ensure that there are no other appliances in your home operate on the same voltage. This could cause a trip to your circuit breaker.